Welcome to Ishine Online Shopping Store!
Mar 16, 2023 / By Aamir Sheeraz / in Commercial
Mobile phones are the most used smart devices in this day and age. It has become the basic need of every person as you can perform all your tasks on a phone with ease and right from the palm of your hand. But no matter how expensive your phone is, it can still get damaged and the one thing which is most vulnerable to damage is the screen.
Luckily you can find a good quality mobile phone screen protector anywhere in the market. But you might have seen it plenty of times that air bubbles start to form under the tempered glass protector, which you have applied on the phone. If you are faced with this issue or you want to know how to apply glass screen protector, then you have definitely come to the right place. We are going to be talking about how you can remove air bubbles from a tempered glass screen protector. We will also let you know how to install a glass screen protector. So let us not waste any more time and get right to it.
There are plenty of reasons why you see bubbles under the glass screen protector. The major reason can be that there might be a cavity or some space left, when you are applying the glue to hold the protector. This issue mostly occurs when you see air bubbles while applying the protector. This can also happen if the screen protector is not placed properly the first time and then you tried to remove it. While reapplying it, there might be chances that some smudge or dust particles from your fingers got stuck to the screen. If the glass is not placed properly then it will also leave some space from where air can get in and cause bubbles.
If you start to see the air bubbles with time, then it means that your screen protector has been through a lot. With pressure or a bump, the glass protector can get loose and then it will ultimately cause air bubbles. Overly angry texting or using too much force while texting can also be the reason for air bubbles formation.
Air bubbles can be formed under your glass screen protector while applying it or even when it has gone through a lot. Below mentioned are some really easy and simple methods which you can use to let the air bubbles out from under the screen protector.
When you are seeing air bubbles while applying the protector, then it means that either you missed a spot while putting the glue on the screen or some air got collected inside. All you have to do is look for a credit card or a similar object which you can use on the protector. But make sure that the object which you use is not too sharp as it will damage the protector. Press the card on the protector and push the air bubbles out towards the edges. The push should be firm yet not too hard. Make sure to push all the bubbles out from the same direction. You can also use a soft cotton cloth to push out the bubbles. But don’t put too much pressure on the screen as it can leave you with a cracked or broken LCD screen.
You might have seen it many times but after a few months of using it, you start to see air bubbles under the tempered glass, especially around the edges. This can be easily removed by lifting the screen protector from the side slightly. You can use a credit card, a sharp object, or even your fingernail. When you lift up the protector from the side it will let the air come out and remove air bubbles. But don’t lift it up too much as it can misplace the protector.
You can also use cotton swabs or vegetable oil to remove air bubbles that are formed around the edges. Gently apply the oil on side of your phone and it will let the air bubbles out. But don’t put too much oil as it can get inside the screen and harm the device.
Now that we have gotten everything out of the way, let us look at some easy steps to apply a screen protector safely to your mobile device.
The first thing you need to do is clean the screen of your phone with an alcohol wipe or a clean and soft cotton cloth. Make sure there are no dust particles on the screen and avoid touching the screen as your fingerprints will leave some smudges on the screen which will never be good for you.
If your glass screen protector includes a glue, then apply the glue and rub it gently on the screen till you have it applied all over perfectly. Then place the protector on the screen but make sure you have placed it in the accurate position.
Once you have placed the screen protector on the screen apply a little pressure on it, so the glue solution sticks to the screen. Then take a card or similar flat sharp object and push the glue towards the edges.
Once you have applied it to the screen take a cloth and clean the surface to clean the protector. Also, try to hold it there for a few seconds so it can settle.
Well, there you have it, this was the article, and we hope it covered everything you needed to know. These were some really easy steps to get air bubbles out of your screen protector. We also mentioned how to safely apply a mobile phone screen protector. If your glass protector is worn out, then it is recommended that you buy a new one from a wholesale tempered glass screen protector supplier.
Mar 16, 2023 by Aamir Sheeraz